Multilayer dental zirconia

With the prevalence of zirconia material, aethestic zirconia ceramic is exceptionally supported by individuals. In any case, the issues stay in coloring way of zirconia that it’s difficult to get shade inclination of characteristic original teeth, even by a few preparing steps. It effortlessly causes drawback of uneven coloring, unapparent translucency.

To settle it and make perfect restoration ,dentsma have already launched multilayer wieland dental zirconia blank through constant innovative work sucessfully. It’s one of a kind as far as regular shade and fine structure.There is no need of coloring once more! Shading inclination is near the dynamic lessening in shading from cervical to incisal part of natural teeth.


Along these lines, efficient, naturally translucency can be enhanced a great deal too.Finally,The restorations can be presented 6 layer gradient colors directly when completed the proceedure of  sintering.

dental zirconia blocks manufacturers

Dentsma is a professional of dental zirconia block manufacturer,the product can be even applied at dental zirconia implant,it offers distributor great confidence to do the local market.


There are stardard Vita 16 shade avaiable !

What is the dental zirconia disc available 

Wieland | Sirona | Vhf | Amann girrbach | Roland | Zirkonzahn etc most popularity dental
cad cam system compatiable

multilayer dental zirconia blocks

Application

Crown √
Bridge √
3-4 units bridge √
5-6 units bridge √
Bridges over 7 units √
Cantilever bridge √
Inlay bridge √
Maryland bridge √
Telescopic crown √
Personalized abutment √

Products features

—–good aging resistance and biocompatibility;
—–Six layers color natural transition;
—–Fluent line top aesthetic effect;
—–Compatible: OPEN CAD/CAM system,Zirkonzahn,Amann girrbach also available;
—–Bending Strength: 1000MPA

Stardard reference

Y2O3 5.3wt%
Al2O3 0.25wt%
SiO2 ≤0.02wt%
Fe2O3 ≤0.02wt%
Na2O ≤0.02wt%
aging properties monoclinic phase <25%
chemical solubility ≤200ug.cm2
Density ≥6.08g/cm2
Flexural Strength: 1200Mpa
Flacture toughness: 5Mpam0.5
Hardness(Hv10)+2: 1250

By dentsma

Leave a Reply

Your email address will not be published. Required fields are marked *